Falstaff logo

Documents

View the source documents currently available in Falstaff and understand what each one is best used for.

Select a document

Choose a document above to view its scope and intended use.

Browse documents (16)

  • 29 CFR 1926.501 — Duty to have fall protection

    OSHA regulation 29 CFR 1926.501 sets out when construction employers must provide fall protection on walking and working surfaces, including unprotected edges, leading edges, holes, roofs, excavations, wall openings and other specified work. It identifies permitted protection systems and circumstances for fall protection plans, and requires measures to protect employees from falling objects.

  • 29 CFR 1926.502 — Fall protection systems criteria and practices

    OSHA regulation 29 CFR 1926.502 sets the criteria and practices for fall protection systems used in construction. It covers guardrails, safety nets, personal fall arrest and positioning device systems, warning lines, controlled access zones, safety monitoring, hole covers, protection from falling objects, and site-specific fall protection plans.

  • A Guide to Landlords’ Duties: Gas Safety (Installation and Use) Regulations 1998

    HSE guidance for landlords explaining their duties under the Gas Safety (Installation and Use) Regulations 1998. It covers maintaining gas appliances, arranging annual gas safety checks, keeping and providing gas safety records, managing tenant access, using agents, and responding to unsafe appliances or failed safety checks.

  • A Guide to the Gas Safety (Management) Regulations 1996 (as amended) (L80)

    Provides official HSE guidance on the Gas Safety (Management) Regulations 1996, incorporating the 2023 amendments. It explains the legal duties placed on gas transporters and other duty holders, including safety cases, network management, gas quality standards, emergency arrangements, biomethane, LNG facilities, and the operation of the gas transmission and distribution network.

  • Drivers’ hours and tachographs: goods vehicles

    GOV.UK guidance for drivers and operators of goods vehicles on drivers’ hours, breaks, rest and tachograph records. It explains when assimilated, AETR and GB domestic rules apply, including exemptions, international journeys, working time and enforcement.

  • Fall Protection in Construction

    OSHA Publication 3146 explains federal fall-protection requirements for construction under 29 CFR 1926 Subpart M. It covers when employers must provide protection, criteria for guardrails, safety nets and personal fall arrest systems, hazards in particular work areas, fall protection plans, and worker training.

  • Managing for health and safety (HSG65)

    HSE guidance on managing health and safety effectively within an organisation. HSG65 explains a practical Plan, Do, Check, Act approach to health and safety management, covering leadership, policy, planning, risk profiling, worker involvement, competence, performance monitoring, incident investigation and organisational learning.

  • Reducing error and influencing behaviour (HSG48)

    Issued by the Health and Safety Executive, this guidance document focuses on the impact of human factors on workplace health and safety, providing practical strategies for identifying, assessing, and controlling risks associated with human error and behavior. It includes case studies and emphasizes the importance of understanding how organizational and individual characteristics influence safety outcomes.

  • Safety in the Installation and Use of Gas Systems and Appliances (L56)

    HSE Approved Code of Practice and guidance for the Gas Safety (Installation and Use) Regulations. It covers gas systems, appliances, fittings, flues, installation pipework, meters, emergency controls, competence, ACOP material, guidance and typical installation diagrams.

  • Safe use of ladders and stepladders

    HSE guidance on choosing, checking and using ladders and stepladders safely at work. It explains when a ladder may be suitable for work at height, how to position and secure different ladder types, and how to inspect them before use and at regular intervals.

  • Safe use of lifting equipment: Lifting Operations and Lifting Equipment Regulations 1998

    HSE’s L113 combines the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) with an Approved Code of Practice and guidance for the safe use of lifting equipment at work. It explains where the rules apply and covers equipment strength and stability, lifting people, positioning, marking, planning and supervising operations, thorough examination, reporting defects, and keeping records.

  • Safe use of work equipment: Provision and Use of Work Equipment Regulations 1998

    HSE’s Approved Code of Practice and guidance on the Provision and Use of Work Equipment Regulations 1998 (PUWER) explains duties for providing and using work equipment safely. It covers suitability, maintenance, inspection, information and training, machinery safeguards, controls, and mobile work equipment.

  • The Electricity at Work Regulations 1989: Guidance on Regulations

    HSE’s HSR25 sets out the Electricity at Work Regulations 1989 alongside official guidance on precautions against death or injury from electricity at work. It explains who has duties and covers electrical systems, equipment, conductors, earthing, isolation, live working and competence.

  • Work at Height Regulations 2005 — working copy incorporating S.I. 2007/114 amendments only

    Working copy of the Work at Height Regulations 2005 (S.I. 2005/735) incorporating the changes made by S.I. 2007/114 only. It sets out duties for planning and carrying out work at height, choosing and inspecting work equipment, and protecting people from falls, falling objects and fragile surfaces. The schedules specify requirements for guard-rails, working platforms, fall protection systems, ladders and inspection reports.

  • Working at height: A brief guide

    Issued by the Health and Safety Executive, this guide outlines employer responsibilities and safety measures to protect employees from falls while working at height, in accordance with the Work at Height Regulations 2005. It provides practical steps for planning, equipment selection, and risk assessment to ensure compliance and enhance workplace safety.

  • Working with substances hazardous to health: A brief guide to COSHH

    HSE's brief guide to COSHH explains how employers can identify substances hazardous to health, assess exposure, and select measures to prevent or adequately control it. It covers safety data sheets, control equipment and safe working methods, checking and maintaining LEV and PPE, worker training, exposure monitoring, and health checks.